VK2 Vmix keyboard control camera method

VK2 support V-Mix software, support camera PTZ control，compatible with SONY VISCA protocol, PELCO-D, PELCO-P protocols，here are the RS422 controls:

One: Set the preset positions (2 buttons combination operation)

Set Preset Position

1: Set (29) + 1(44) ; First Press and hold "29" key, then press "1" to set preset position

2: Set (29) + 2(45) ; First Press and hold "29" key, then press "2"  to set preset position

3: SET (29) + 3(46) ; First Press and hold "29" key, then press "3"  to set preset position

Preset 4: SET (29) + 4(47) ; First hold down the "29" button, then press the "4"  to set preset position

Notes: Keypad number means "29-set, " "34-play, " "39-pause. "

Two: Call preset positions

Press 1 2 3 4(only 4 presets)

Three: Focus

48=FAR 49=NEAR

Focus away: FAR, Focus close:NEAR

Four: Camera address

Consistent with PVW; for example, Camera 1 is PVW1 bright

Modify the camera protocol (3-button combination operation)

Settings (29) + pause (39) + 1(44) Camera Protocol VISCA

Settings (29) + pause (39) + 2(45) Camera Protocol Pelco D

Settings (29) + pause (39) + 3(46) Camera Protocol Pelco P

For example: select the VISCA protocol, first press and hold "settings" and "pause" , then press the preset position "1" , time 1 second to release all buttons.

Six: Connection

RS422: camera and keyboard connection

The RS422 connection method between the control unit and BRC-Z330

Note:  BRC-Z330 set     DIP3 ON =RS422,

DIP4 OFF =9600

DIP5-7 OFF= address 0

RS485 Camera and keyboard connection:

Camera 485+   with keyboard TX+

Camera 485-   with keyboard TX-